GASGAS MC 250, r.v. 2023
MOUNTING KIT
2 406 Kč
Extremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials
FORK SUPPORT
412 Kč
Stabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tight...
FORK PROTECTOR
728 Kč
For all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector
MOUNTING KIT
2 406 KčExtremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials
FORK SUPPORT
412 KčStabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tight...
FORK PROTECTOR
728 KčFor all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector
ENGINE SUPPORT 554
Tool for securing the removed engine on the engine work stand
HOKE SPANNER F.STEERINGH. BEAR
Tool for securing components (steering head bearing)
SPOKE TORK KEY
Torque wrench with various bits in the kit for tightening fittings to tightening torque (spokes)
ADJUSTING PLATE 250
Tool for checking the X dimension (piston protrusion)
MAGNETIC PULLER M 27X1 KOKUSAN
Tool for pulling off components (rotor)
MOUNTING TOOL F.BEARING NJ 207
Tool for pulling off components (inner bearing race of crankshaft)
PLIERS F. FOOTREST SPRING
Tool for removing and mounting rider footrests
SEPARATOR PLATE CRANKSHAFT
Tool for separating the crankshaft
PRESS. TOOL F. CRANKSHAFT
Sleeve with cover used as insert in the pressing tool for pressing the crankshaft together
PRESS. TOOL F. CRANKS. CPL.
Tool for pressing the crankshaft together
PRESS STIFT
Tool for pressing components in and out (radial shaft seal ring of crankshaft)
HOLDING TOOL CHASSIS LC4
Tool for pressing components in and out (bearing rings when changing steering head bearing)
MOUNT.TOOL STEER.HEAD BEAR.LC4
Tool for pressing components in (bearing rings when changing steering head bearing)
DISMOUNT. TOOL F. BEARINGS LC4
Tool for pressing components out (bearing rings when changing steering head bearing)
MOUNTING TOOL
Tool for removing and installing components (coolant pipe)
DE-MOUNT.TOOL ADAPTER BUSHING
Tool for driving components out (collar bushings)
MOUNTING AID GASKETSTR.
Tool for protecting components (thread of piston rod)
SPECIALSOCKET FOR AIR FORK
Tool for loosening and tightening components (screw cap)
MOUNTING SLEEVE MAIN PISTON
Tool for mounting components (piston rod in the air cartridge)
VENTILATION & FILLING DEVICE
Tool for bleeding and filling dampers
FILLING ADAPTER F. FORK
Adapter for filling tool for filling the damper with nitrogen
GUID.BUSHING DISM./MOUNT. D=18
Tool for positioning components (DU bush in seal ring retainer)
MOUNT. SLEEVE
Tool for mounting components (seal ring retainer on piston rod)
SCREW LOCKING
Medium strength thread lock - contents, 50 ml. Temperature resistant from -55 to +200 °C Fills gaps...
REPAIR KIT 56 G
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated har...
