Extremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials
All required parts for converting your 250 to a 300 Enduro for the E3 class. Requires mapping file of 300 injection engine!
Stabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tight...
For all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector
Extremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials
All required parts for converting your 250 to a 300 Enduro for the E3 class. Requires mapping file of 300 injection engine!
Stabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tight...
For all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector
Tool for checking the X dimension (piston protrusion)
Tool for pulling off components (inner bearing race of crankshaft)
Tool for removing and mounting the rider footrests and removing the spacer from the starter motor
Tool for removing and mounting rider footrests
Sleeve with cover used as insert in the pressing tool for pressing the crankshaft together
Tool for pressing the crankshaft together
Tool for pressing components in and out (radial shaft seal ring of crankshaft)
Tool for pressing components in and out (bearing rings when changing steering head bearing)
Tool for pressing components in (bearing rings when changing steering head bearing)
Tool for pressing components out (bearing rings when changing steering head bearing)
Tool for pressing components in (crankshaft support bearing)
Tool for adjusting components (centrifugal force controller)
Tool for removing and installing components (coolant pipe)
Tool for driving components out (collar bushings)
Tool for assembling the fork legs (pulling out piston rod)
Tool for bleeding and filling dampers
Adapter for filling tool for filling the damper with nitrogen
Tool for positioning components (DU bush in seal ring retainer)
Tool for mounting components (seal ring retainer on piston rod)
Adapter for the vacuum pump, for filling and bleeding the damper
Medium strength thread lock - contents, 50 ml. Temperature resistant from -55 to +200 °C Fills gaps...
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated har...
Medium-strength thread lock. Suitable for all metal thread connections.