GASGAS EC 250, r.v. 2023
MOUNTING KIT
2 406 Kč
Extremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials
300 FACTORY KIT
24 276 Kč
All required parts for converting your 250 to a 300 Enduro for the E3 class. Requires mapping file of 300 injection engine!
FORK SUPPORT
412 Kč
Stabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tight...
FORK PROTECTOR
728 Kč
For all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector
MOUNTING KIT
2 406 KčExtremely sturdy aluminum brackets Prevents broken levers Including all required assembly materials
300 FACTORY KIT
24 276 KčAll required parts for converting your 250 to a 300 Enduro for the E3 class. Requires mapping file of 300 injection engine!
FORK SUPPORT
412 KčStabilises the motorcycle during transport Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tight...
FORK PROTECTOR
728 KčFor all 48 mm forks Ideal protection for sealing the fork For use with an open fork protector
SPOKE TORK KEY
Torque wrench with various bits in the kit for tightening fittings to tightening torque (spokes)
ADJUSTING PLATE 250
Tool for checking the X dimension (piston protrusion)
MOUNTING TOOL F.BEARING NJ 207
Tool for pulling off components (inner bearing race of crankshaft)
CLAMP FOR FOOTRESTSPRING
Tool for removing and mounting the rider footrests and removing the spacer from the starter motor
PLIERS F. VAR.ONE-EAR CLAMP 03
Tool for mounting hose clamps
PLIERS F. FOOTREST SPRING
Tool for removing and mounting rider footrests
SEPARATOR PLATE CRANKSHAFT
Tool for separating the crankshaft
PRESS. TOOL F. CRANKSHAFT
Sleeve with cover used as insert in the pressing tool for pressing the crankshaft together
PRESS. TOOL F. CRANKS. CPL.
Tool for pressing the crankshaft together
PRESS STIFT
Tool for pressing components in and out (radial shaft seal ring of crankshaft)
HOLDING TOOL CHASSIS LC4
Tool for pressing components in and out (bearing rings when changing steering head bearing)
MOUNT.TOOL STEER.HEAD BEAR.LC4
Tool for pressing components in (bearing rings when changing steering head bearing)
DISMOUNT. TOOL F. BEARINGS LC4
Tool for pressing components out (bearing rings when changing steering head bearing)
PRESS TOOL DM28
Tool for pressing components in (crankshaft support bearing)
4-KANT-KEY SW5 MM
Tool for adjusting components (centrifugal force controller)
MOUNTING TOOL
Tool for removing and installing components (coolant pipe)
DE-MOUNT.TOOL ADAPTER BUSHING
Tool for driving components out (collar bushings)
TUBE ONTLUCHTLINGS HULPSTUK
Tool for assembling the fork legs (pulling out piston rod)
VENTILATION & FILLING DEVICE
Tool for bleeding and filling dampers
FILLING ADAPTER F. FORK
Adapter for filling tool for filling the damper with nitrogen
GUID.BUSHING DISM./MOUNT. D=18
Tool for positioning components (DU bush in seal ring retainer)
MOUNT. SLEEVE
Tool for mounting components (seal ring retainer on piston rod)
FILLING ADAPTER ''A''
Adapter for the vacuum pump, for filling and bleeding the damper
SCREW LOCKING
Medium strength thread lock - contents, 50 ml. Temperature resistant from -55 to +200 °C Fills gaps...
REPAIR KIT 56 G
The repair kit is a two-component epoxy resin adhesive. Hardens at room temperature: accelerated har...
LOCTITE 243 BLUE 5 ML
Medium-strength thread lock. Suitable for all metal thread connections.
